Real-Time Planet Tracking System & Trajectory Prediction

Introduction

This project aims to make a system that effectively tracks celestial bodies (such as planets ) with a fair amount of accuracy. We will be using some algorithms along with a processing unit for the calculations and a servo mechanism to show the location of the planet physically!. The hardware used in the project is pretty much basic and simple because the primary focus of this project is the software that is to make people understand the algorithms and their implementations. So please bear with my “un-formatted” hardware.

Not just planet tracking  you will learn some additional important things that you can implement in your other projects:

  1. Planet tracking using Kepler’s algorithms
  2. Many coordinate systems and their interconversion
  3. pan-tilt programming and servo mapping (3.5 turns Servo and 180 degrees Servo )
  4. MPU9250 auto-calibration programming
  5. Using Madwicks/Mahony Filter to Stabilise MPU readings.
  6. Yaw correction using P- controller with MPU9250

The steps are too detailed to fit in a single page so I have split the project into different pages they are:

  • Step 1: Calculation of Right Ascension and Declination and its conversion to Azimuth and Altitude [Calculated using Kepler’s Laws] using Osculating Elements Here is the link https://paulsite.com/calculation_of_right_ascension_and_declination/
  • Step 2: The Circuitry (connections of GPS Module U-BLOX NEO-6M or similar, pan – tilt servo )  and Servo Mapping. Here is the link https://paulsite.com/hardware_integration/Note: If you do not use an MPU9250, you will have to align your system in its initial state to the North direction.
  • Step 3: This step uses the MPU9250 for automatic north detection and its alignment and the best part is that it is Dynamic i.e. even you keep changing (the yaw angle) or azimuth alignment it will continuously sense the error and correct it dynamically. Here is the link https://paulsite.com/mpu_programming/Step 4: Software Integration and Trajectory Prediction. Go to this section for the final Arduino code, Here is the link https://paulsite.com/software_integration/

RTPT (Real Time Planet Tracking System and Trajectory Prediction) Copyright © 2016 Shubham Paul, Samhita Ganguly, Rohit Kumar  GNU GPL3+

This entry was posted in Embedded Hardware, Embedded Software, Maths, Planet Tracking System and tagged , , , , , , , , , , , . Bookmark the permalink.

27 Responses to Real-Time Planet Tracking System & Trajectory Prediction

  1. Suggestions for note mentioned in step 2
    It’s not necessarily that you need mpu9250 only. It would be better if you mention necessity of magnetic compass in IMU for getting true north and dynamic yaw.
    So can be done using any of following IMU unit which has HMC5833 or similler compass Or BNO055 IMU.

  2. Pingback: Real-Time Planet Tracker With Laser-Point Accuracy | Hackaday

  3. Elecrom says:

    This is great ! One question … can it carry a weight of small camera?

  4. Winston says:

    Very cool. If you’d come up with different software, this would be *extremely* useful in the hobby of visual satellite observation as it could use a green laser to point to or at least near to the spot in the sky where the satellite will appear once it achieves a visible magnitude as it exits the Earth’s shadow so one knows exactly where to look.

    Visual Satellite Observer’s Home Page

    http://satobs.org

    The best satellite tracking software by far is the freeware Heavensat.

    • Shubham Paul says:

      This project can be generalised to track any Celestial Body or Sattelite( artificial or natural) , for that it requires the orbital elements of the particular body( satellite, star etc.) moreover you can just get the “right ascension” and “declination” of the satellite (from Internet) and directly feed it to this system (in case you don’t have the orbital elements) continuously.You don’t have to change the software much.

  5. Pingback: Real-Time Planet Tracker With Laser-Point Accuracy – Boltron – Technogeek Marketplace

  6. Pingback: Un dispositivo DIY de seguimientos de planetas en tiempo real con láser

  7. Pingback: Real-Time Planet Tracker With Laser-Point Accuracy | Ad Pub

  8. Pingback: Arduino Blog – Track planets with a laser!

  9. Reblogged this on deltainnovativelabs and commented:
    I might have to wire up my telescope with this, using my LinkIt one.

  10. Pingback: How to Make a Smart Laser Pointing Planet Tracker #CitizenScience #DIY #Arduino « Adafruit Industries – Makers, hackers, artists, designers and engineers!

  11. Francesco says:

    Sorry, your realization is very great, in your project there is a potenziometer… what is his ohm? after where is the code of all the project that i will introduce in arduino ? what is the mode selector (normal / trajectory) button?
    thanks

  12. Francesco says:

    i just use your code in the link for the realization?

  13. Samhita Ganguly says:

    Reblogged this on Samhita's Projects.

  14. Pingback: Hardware Integration of RTPT | paulsite.com

  15. Pingback: Software Integration and Trajectory Prediction | paulsite.com

  16. Pingback: Calculation of Right Ascension and Declination and its conversion to Azimuth and Altitude | paulsite.com

Leave a Reply

Your email address will not be published. Required fields are marked *

71 page views, 46 database queries in 0.587 seconds.